1. print icon 인쇄

HEB250 High Efficiency Brake

  • Small compact size
  • Through bores and keyways
  • Inch and metric bores
  • Optional mounting adapter
  • High torque output
  • High heat dissipation
  • Longer pad life
  • Bi-directional cooling
  • Optional integrated proximity sensor


  • Climate Class3K3 (EN60721)
  • Pollution Degree2 (IEC664-1)
  • Altitude 0 to 2,000 meters
  • Mounting StyleThrough bore and keyway
  • Maximum RPM2,000 RPM
  • Pad Coefficient of Friction Low: 0.12
    Medium: 0.41
    High: 0.51
  • Maximum Pressure621 kPa
  • Minimum Activation Pressure21 kPa
  • 오퍼레이팅 온도0 to 50˚ C
  • Storage Temperature-30 to 80˚ C
  • 언클로저IP20 (IEC529)
  • Fan Requirements
  • Voltage24 VDC
  • Current1.5 ADC
  • Proximity Sensor Requirements
  • 서플라이 전압24 VDC
  • Signal OutputNPN N.O.
  • Maximum Signal Current 200 mADC
  • Maximum Frequency 2 kHz
    One Pulse per Revolution

Brake pads do not contain asbestos


The MAGPOWR HEB250 pneumatic brake packs many powerful features into a compact design. Ideal for the demands of general converting and corrugating operations, the HEB produces higher torque at cooler brake pad temperatures. These cooler temperatures along with a thicker brake pad will ensure longer pad life to minimize downtime.

The HEB is engineered for rugged environments, utilizing a single, ventilated cast iron rotor with a bi-directional flute design which allows for efficient cooling when used in either direction of rotation, a through bore and keyway design for easy mounting of the rotor to the brake shaft and an integrated set of caliper mounting brackets that can be mounted directly to the machine frame. These caliper mounting brackets are also an integral part of the safety guarding along with the caliper bodies to reduce the overall size of the brake.

Web tension is accurately controlled by adjusting air pressure to the calipers, pushing brake pads against each side of the rotor to produce consistent brake torque.

The HEB Brake comes partially pre-assembled according to your application. In this 5-minute video, Mike Hemphill shows final installation.


Chinese, Simplified


Maxcess MAGPOWR logo

MAGPOWR Engineers have developed software to help you select the best clutch, brake or load cell for your application. Contact us at +1.405.755.1600 to verify sizing or ask questions.

If you click on the link and nothing happens, right click on the download link and choose "open in new tab"

彩票高賠率好平台 北京赛车pk10玩法 在线快3平台 江苏快3平台 江苏快3平台 江苏快三质合走势图 彩票高賠率好平台 江苏快3 PK10哪个平台赔率高 江苏快三走势图